This module is a single bare PCB with header pins. It features the freedom of dot-board with the convenience of strip-board to allow you to build your own RC2014 modules. The 39 x 19 matrix of pads (716 in total)features some pre-connected pins as indicated by the silkscreen. This makes it easy to connect to all the signals on the backplane and add either narrow or wide bodied ICs along the center.
RC2014
- RC2014
- Assembly Guides
- Full Kits
- Backplanes
- Modules
- Troubleshooting
- History
- Build Your Own RC2014
- Block Diagram
- Contact Me
Sign up to our GDPR compliant monthly(ish) newsletter
Here
Blog
- Component Substitution Due To The Worldwide Chip Shortage
- Pi Pico VGA Soldering Tips
- Zero to ASIC – Deep dive on MOSFETs
- Zero to ASIC – Introduction
- Is my ROM blank?
- CrayZee Eighty
- RCade – An Arcade Cabinet For RC2014
- BASIC, CP/M, RomWBW or Small Computer Monitor
- Retro Challenge 2017/10 – Returning to Zork
- Retro Challenge 2017/10 Zork First Stream